Tempering, carburizing, annealing, hardening and quenching, solution annealing, forging, curing, preheating, drying, ageing – these are only some of the applications which are possible with our extensive program of furnaces and plants. From the compact hardening furnace to fully-automatic plants with conveying technology and process documentation, for most heat treatment processes that are used in additive manufacturing, we will certainly find a solution tailored to your application.
Many metals require a heat treatment under protective, reaction gases or in vacuum. The heat treatment of aluminium, drying or preheating processes are usually processes in air.
Many metals require a heat treatment under protective, reaction gases or in vacuum. The heat treatment of aluminium, drying or preheating processes are usually processes in air.
Thermal Process Technology I
This catalogue describes furnaces and equipment used for heat treatment processes in air, such as Tempering, Annealing, Hardening, Quenching, Solution Annealing, Ageing, Forging, Preheating, Drying, Curing.- Which Furnace for Which Process?
- Additive Manufacturing, 3D-Printing
- Plastics
- Brazing, Forming
- Retort Furnaces, Clean Room Solutions
- Forced Convection Furnaces
- Bogie Hearth Furnaces
- Chamber Furnaces
- Top Hat Furnaces or Bottom Loading Furnaces with Wire Heating up to 1400 °C
- Charging Devices and Accessories for Chamber and Bogie Hearth Furnaces
- Quench Tanks
- Protective Gas and Carburization Systems for Annealing and Hardening
- Salt-Bath Furnaces for Heat Treatment of Steel or Light Metals, Electrically Heated or Gas-Fired
- Martempering Furnaces using Neutral Salts, Electrically Heated
- Furnaces for Continuous Processes
- Energy Efficiency Technology
- Tempering Plants for Aluminium and Steel
- Temperature Uniformity and System Accuracy
- AMS 2750 E, NADCAP, CQI-9
- Process Control and Documentation
Thermal Process Technology II
The catalogue Thermal Process Technology II presents the various furnace concepts and accessories available, which can be used for the different processes under flammable or non-combustible reaction gases, in a salt bath or in vacuum.- Furnaces and Accessories for Heat Treatment of Metals
- Which Furnace for Which Process?
- Hardening, Carburizing, Nitriding, Brazing, MIM
- Additive Manufacturing, 3D-Printing
- Hot-Wall Retort Furnaces up to 1100 °C
- Cold-Wall Retort Furnaces up to 3000 °C
- Retort Furnace Cooling Systems
- Tube Furnaces for Processes under Flammable or Non-Flammable Protective or Reaction Gases or under Vacuum
- Wire and Strand Annealing Furnaces
- Continuous Plants for Protective or Reaction Gas Atmospheres
- Salt-Bath Furnaces for Heat Treatment of Steel or Light Metals
- Martempering Furnaces using Neutral Salts
- Chamber Furnaces for Annealing and Hardening
- Stainless Steel Heat Treating Foil to avoid Surface Reactions
- Annealing and Heat Treating Foils
- Accessory Equipment for Processing Bags, Envelopes and Foils
- Annealing Envelopes
- Annealing Bags
- Carburizing Granulate
- Nitriding Powder and Activator
- Chamber Furnaces with Brick Insulation or Fiber Insulation
- Chamber Furnaces with Drawer Bottom or as a Bogie
- Forced Convection Chamber Furnaces < 675 Liters
- Sealed Forced Convection Chamber Furnaces NA-I and NA-SI
- Forced Convection Pit-Type Furnaces
- Temperature Measurement in Gas Supply Systems
- TUS Measuring Frame for Protective Gas Box
- Tool Shop Hardening Systems
- Protective Gas Hardening System SHS 41
- Gas Supply Systems
- Vacuum Pump
- Protection Clothing
- Draw Hook, Binding Wire, Hardening Tongs
- Cooling Platforms
- Charging Devices with and without Cooling Fan for Models N 31/H - N 641/13, N 30/45 HA - N 500/85 HA, LH (LF) 15/.. - LH (LF) 216
- Quenching and Cleaning Baths
- Hardening Oil, Quench Water Additive, Detergent, Insulating Materials
- Temperature Uniformity and System Accuracy
- AMS 2750 E, NADCAP, CQI-9
- Process Control and Documentation